On our farm, we’ve received an outdated outbuilding and a dream to construct a social gathering barn. Progress is coming alongside properly. We’re trying ahead to having a gathering area on the farm that spares or home the added foot site visitors.
As a part of the undertaking, I’m putting in a do-it-yourself vent hood. I actually needed to make use of materials discovered throughout property cleanup, so I pieced it collectively utilizing discovered components. And that features scrap steel I got here throughout on the farm.
However this entails bending barn tin steel items into form for the hood, which jogged my memory of a standard query: How do you bend sheet steel and not using a bending brake?
I’ve a simple approach to bend thin-gauge sheet steel items and get the job finished.
Learn extra: Be taught to weld so you’ll be able to repair your personal farm tools!
What You Want
Fortunately, this methodology for bending sheet steel items doesn’t require plenty of instruments. In actual fact, you in all probability have the objects required laying round.
- two items of angle iron to make a “sandwich”
- flat-bladed screwdriver to attain the steel
- a few clamps
- sawhorse
Learn extra: Do you will have a steel detector? Each farmer ought to contemplate this buy.
Instructions
First, place a bit of angle iron in opposition to the sawhorse. This would be the backside a part of your “sandwich.”
Subsequent, lay your piece of scrap tin on the angle iron the place you need the bend. Place the second piece of angle iron on prime of this, then clamp every part down. Be certain that your lengthy edge is out while you do that so you should utilize the load from the longer edge to your mechanical benefit. (It’s simpler to bend an extended size.)
With every part clamped in place, use the screwdriver blade to attain the scrap steel alongside the sting of the angle iron. Run the blade alongside this observe just a few instances to make a visual line. (You may watch me do that within the video above.)
When you’ve scored the steel, you’ll be able to merely bend the steel up alongside the scored line to make your bend. As long as you will have the items clamped good, the bend needs to be fairly simple. For those who want a good edge, you should utilize a hammer to create that.
Take away the clamps and prime angle edge. You may then full the bend by hand for a clear edge.
Watch the video above to see how I bent discovered scrap steel for my do-it-yourself vent hood.
GIPHY App Key not set. Please check settings